Gear by mail

Nickadi13 · Nov 11, 2021

Send0 said:
WTF kind of shit setup is this. Why is there a fan? Why are there beads? Why does he have a shit coil type burner instead of a temperature controlled stir plate? Why does his vacuum pump look like a cheap $9 POS aquarium pump?

But my biggest question is why the hell is he setup inside of a grow tent?

UGBB needs to have a contest for best source kitchen photo..although this might have already won it.

dirtys1x · Nov 12, 2021

Test_subject said:
Bruh…

View attachment 15174

This really be the type of setup that offers the most potent gear on the market. This is the real deal. Wouldn’t order from anything less.

Methyl mike · Nov 13, 2021

Test_subject said:
Bruh…

View attachment 15174

That just screams sterility.

Methyl mike · Nov 13, 2021

Test_subject said:
That fuckin’ guy man.

I don’t know if my favourite part of that picture is the hanging anal beads or the fan that he has perfectly positioned to blow shit all over the place.

I just cannot imagine what he was thinking posting that.

D907 · Nov 13, 2021

I ordered domestic and got all 3 shipments. The ones from one warehouse were 1uite a bit stealthier than the other but. Got all 3 and all that will happen if it gets caught is you'll get a letter and the source will reship it. Only took a week each shipment

ftf · Nov 13, 2021

D907 said:
I ordered domestic and got all 3 shipments. The ones from one warehouse were 1uite a bit stealthier than the other but. Got all 3 and all that will happen if it gets caught is you'll get a letter and the source will reship it. Only took a week each shipment

Sounds like NAPS with the "warehouse" stuff. Just say no.

D907 · Nov 13, 2021

ftf said:
Sounds like NAPS with the "warehouse" stuff. Just say no.

Steroidify

ftf · Nov 13, 2021

Never used them, so I can't speak on it. Let us know how it works out. Good luck.

Skanksmasher · Nov 15, 2021

What if the gear that guy puts out is the best ever lol. Would you pin it? I'm a hard fuck no but you'd be surprised what you can make on a simple set up. I wouldn't but you never know.

silentlemon1011 · Nov 15, 2021

Skanksmasher said:
What if the gear that guy puts out is the best ever lol. Would you pin it? I'm a hard fuck no but you'd be surprised what you can make on a simple set up. I wouldn't but you never know.

Naw
Never would
Because it's not the "Best Gear" if its dirty gear.

Sanitation I'd a PPM fight.
When you're fighting down to 2 microns ...MICRONS in (Ideally) a positive air pressure enclosure.... mistakes even happened when everything is PERFECT
I'm talking Pharma lab level clean, with state of the art tech and air pressure monitoring, with adhesive chemical solutions that flash off and leave zero residue (As a lockdown fibre collection solution on the interior of the enclosure)
Pressure washing, flow hoods etc...

and I've still seen contamination.

It is 100% impossible for that rape hut/Crack brew hut to produce sanitary gear

silentlemon1011 · Nov 15, 2021

Skanksmasher said:
What if the gear that guy puts out is the best ever lol. Would you pin it? I'm a hard fuck no but you'd be surprised what you can make on a simple set up. I wouldn't but you never know.

I may... or may not do that type of thing for a living lol

Yano · Nov 15, 2021

I don't know much about all this brewery jazz but years ago I worked for a company that did all the internal moves for IBM in Sterling Forest NY , some of those rooms you needed clearance to enter , special suits. Those rooms were sterile and filtered down to so many microns. Like Iso 2 n 3 shit , clean 100 rooms , 1000 particles per cubic meter of air or less. There's no way dude is making any thing sterile in that weed tent lol no freakin way.

silentlemon1011 · Nov 15, 2021

Yano said:
I don't know much about all this brewery jazz but years ago I worked for a company that did all the internal moves for IBM in Sterling Forest NY , some of those rooms you needed clearance to enter , special suits. Those rooms were sterile and filtered down to so many microns. Like Iso 2 n 3 shit , clean 100 rooms , 1000 particles per cubic meter of air or less. There's no way dude is making any thing sterile in that weed tent lol no freakin way.

1000 per Cubic Meter is actually quite high in the Pharma world

In a hospital(IPAC) setting, we are typically around 10 per Cubic meter (Under 2UM)
Andy over 2 microns is typically a total fail and reclean/Retest.

AlexDavis43 · Nov 15, 2021

Nickadi13 said:
I know I'm new here so I apologize if this is a stupid question or one no one wants to answer but I am thinking of trying some gear by mail and am a little hesitant to use my real name and address...

I use my real name for shipping. It hasn't been a problem [yet].

Hercule · Nov 29, 2021

D907 said:
I ordered domestic and got all 3 shipments. The ones from one warehouse were 1uite a bit stealthier than the other but. Got all 3 and all that will happen if it gets caught is you'll get a letter and the source will reship it. Only took a week each shipment

What kind of letter if you don't mind me asking? Was it here in the states?

eazy · Nov 29, 2021

Skanksmasher said:
What if the gear that guy puts out is the best ever lol. Would you pin it?

Yes.

What I've previously used could be from similar conditions, I'll never know.

AlexDavis43 · Nov 30, 2021

Hercule said:
What kind of letter if you don't mind me asking? Was it here in the states?

A letter from U.S. Customs asking you to dispute the seizure or confess or something. I think most here would just let their source know about the seizure and ignore the letter.

Bro Bundy · Nov 30, 2021

your gonna look at the mail man like a crack dealer

cocoh23 · Dec 4, 2021

i know a few people *3* that work for the United States Postal Service. It appears my whole worry of bad raws and gear going out of stock should have been the least of my worries. The people I know have told me that in the next few years, the postal service will completely change. Getting gear through the mail could be extremely difficult; especially if they will be allowed to look at our packages, track every pack that comes from one location, they are thinking of every way to possibly stop illegal drugs from going through the mail system. I would hope that’s not the case, but if anyone has an opinion or any facts they would like to share on that, please do.

Send0 · Dec 4, 2021

cocoh23 said:
i know a few people *3* that work for the United States Postal Service. It appears my whole worry of bad raws and gear going out of stock should have been the least of my worries. The people I know have told me that in the next few years, the postal service will completely change. Getting gear through the mail could be extremely difficult; especially if they will be allowed to look at our packages, track every pack that comes from one location, they are thinking of every way to possibly stop illegal drugs from going through the mail system. I would hope that’s not the case, but if anyone has an opinion or any facts they would like to share on that, please do.

You want us to give an opinion on a rumor that has no basis formed to support it yet?

I'll just say this; people will always find a way around the system. The raws I've seen are already shipped in barrier bags (x-ray proof) so I doubt small brewers would be effected, but if you're really this worried then just stock up on raws now and learn how to homebrew.

Once again, I'm not concerned.

Gear by mail

Nickadi13

dirtys1x

Senior Member

Methyl mike

Accelerati Incredibilus

Methyl mike

Accelerati Incredibilus

D907

ftf

Senior Member

D907

ftf

Senior Member

Skanksmasher

silentlemon1011

Resident Jizz Towel

silentlemon1011

Resident Jizz Towel

Yano

Flatlandah

silentlemon1011

Resident Jizz Towel

AlexDavis43

Hercule

eazy

Elite

AlexDavis43

Bro Bundy

Elite

cocoh23

Send0

Taskmaster (Moderator)

Similar threads

New Posts

New Threads