Page 1 of 2 12 LastLast
Results 1 to 12 of 13
  1. #1
    Elite Paolos's Avatar
    Join Date
    May 2014
    Location
    South East US
    Posts
    630
    Thanks
    208
    Thanked 225 Times in 168 Posts

    Made a small batch over the weekend

    Well I ran a small batch over the weekend to see if I could still do it. Yeah just like riding a bike.
    Only differance is now I'm a freak over sterility. I'm in the AC business so I turned my master bath
    into a redneck clean room. Cleaned the joint from top to bottom including the AC vents and even
    covered them with filter media. Created a negative pressure in the space by blocking off the return
    grill that goes back to the unit. That allowed for a pressureized space pulling in nothing from the rest
    of the house.



    Her is a pic (did a tester of TE-250. After that did 50ML TE &Bold)
    new run of HB.jpg

  2. The Following User Says Thank You to Paolos For This Useful Post:

    HydroEJP88 (04-01-2015)

  3. #2
    Elite DF's Avatar
    Join Date
    Apr 2012
    Posts
    8,085
    Thanks
    3,782
    Thanked 2,801 Times in 1,520 Posts
    Looks pretty good... Pin it!

  4. #3
    Elite Paolos's Avatar
    Join Date
    May 2014
    Location
    South East US
    Posts
    630
    Thanks
    208
    Thanked 225 Times in 168 Posts
    Are you kidding I only waited 24 hours and pinned them both....3cc in the VG!

  5. #4
    Elite Tren4Life's Avatar
    Join Date
    Dec 2012
    Location
    living the dream
    Posts
    4,985
    Thanks
    7,181
    Thanked 4,269 Times in 2,106 Posts
    Sweet looks good man.
    traps are the new abs.

  6. #5
    Administrator PillarofBalance's Avatar
    Join Date
    Feb 2012
    Posts
    20,096
    Thanks
    2,003
    Thanked 17,089 Times in 7,394 Posts
    lucky bastard I bet you have a kick ass vacuum pump too. Not some stupid hand pump from a brake kit.
    "Overzealous dosing" -Jin

    Rest in Peace Robot Lord. First round of Natty Boh is on me when I make it up there with you brother.

  7. #6
    Elite Paolos's Avatar
    Join Date
    May 2014
    Location
    South East US
    Posts
    630
    Thanks
    208
    Thanked 225 Times in 168 Posts
    no sir just my thumbs! aint gonna lie I did think about getting fancy though

  8. #7
    Elite Four1Thr33's Avatar
    Join Date
    May 2012
    Location
    Unknown
    Posts
    2,141
    Thanks
    53
    Thanked 53 Times in 38 Posts
    I have a Nalgene hand pump.. Best investment ever.. That hand shit is for the birds
    Wolves don't loose sleepover opinions of sheep

  9. #8
    Member MATT_'s Avatar
    Join Date
    May 2014
    Location
    Poenix Arizona
    Posts
    3
    Thanks
    0
    Thanked 0 Times in 0 Posts
    You would have a positive pressure room not negative that would be bad. But you would not have anything unless you draw out side air at a lower or higher rate than you exhaust air out of the space giving you a negative or positive draw. O.R. and clean rooms run at something like .1 to .5 INWC if its a positive than you run .25 or so INWC. I program engineer and design systems for a living. Good luck with your room product looks good.

  10. #9
    Elite Youngblood1984's Avatar
    Join Date
    Feb 2015
    Location
    South
    Posts
    642
    Thanks
    352
    Thanked 183 Times in 142 Posts
    Wow a little into depths. .. I'm sure he know what's he's doing there's a couple of us hvac tecks and engineers on this forum .....

  11. #10
    Elite HydroEJP88's Avatar
    Join Date
    Jan 2015
    Location
    Slip & Slide
    Posts
    2,478
    Thanks
    1,632
    Thanked 1,184 Times in 847 Posts
    That right there is what dreams are made of
    My favorite quote from my time here at the UG

    "Oh thank god you actually look like you lift..." -POB

  12. #11
    Elite Cobra Strike's Avatar
    Join Date
    Apr 2012
    Location
    Smack Center
    Posts
    2,735
    Thanks
    1,220
    Thanked 1,980 Times in 780 Posts
    Quote Originally Posted by Paolos View Post
    Are you kidding I only waited 24 hours and pinned them both....3cc in the VG!
    I didnt know a VAG can hold 3cc? Lol

    Quote Originally Posted by PillarofBalance View Post
    lucky bastard I bet you have a kick ass vacuum pump too. Not some stupid hand pump from a brake kit.
    Whats wrong with bleeding your brake lines then pumping some gear through a filter?

    Quote Originally Posted by MATT_ View Post
    You would have a positive pressure room not negative that would be bad. But you would not have anything unless you draw out side air at a lower or higher rate than you exhaust air out of the space giving you a negative or positive draw. O.R. and clean rooms run at something like .1 to .5 INWC if its a positive than you run .25 or so INWC. I program engineer and design systems for a living. Good luck with your room product looks good.
    Wow....good info but wow lol

  13. #12
    Elite AlphaD's Avatar
    Join Date
    Nov 2012
    Posts
    8,166
    Thanks
    4,028
    Thanked 3,270 Times in 1,950 Posts
    [QUOTE=Cobra Strike;278465]I didnt know a VAG can hold 3cc? Lol


    Cobra thats because the women have been telling your 1cc is enough......they are lying.
    "A Man's Worth Is No Greater Than His Ambitions" Marcus Aurelius
    #Strength First Boston

Page 1 of 2 12 LastLast

Similar Threads

  1. eq batch
    By Tman in forum Chemical Conversion and Homebrewing
    Replies: 4
    Last Post: 01-09-2019, 06:05 AM
  2. Clothes getting too small
    By ripped_one in forum Anabolic Steroid Cycle Discussion
    Replies: 7
    Last Post: 11-12-2012, 09:36 PM
  3. needle gauge, how small is too small
    By trim in forum Anabolic Steroids
    Replies: 20
    Last Post: 09-17-2012, 06:07 PM
  4. First batch
    By Solid Snake in forum Chemical Conversion and Homebrewing
    Replies: 28
    Last Post: 07-08-2012, 09:42 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •