Which Needle Size For Which Site

[GenuineTomato]

I’ve read loads of different articles and posts about needle size selection.

Could someone help me.

I’m 90kg with a BF around 20%.

I have the following needles.
[FONT=&quot]Blue 23G X 1.25"[/FONT]
[FONT=&quot]Orange 25g x 1"[/FONT]
[FONT=&quot]Green 21g x 1.5"

The sites I will be injection IM injections in are Glutes, Thigh and Delt.

Ive been drawing my Test 300 using the 21g 1.5” and have injected once in my Glute using the blue 23g 1.25”.

I wanted to find out which needles I should be using for which site.

Thanks for your help in advance[/FONT]

 

[Yaya]

Glute 22-25g

Delt 23g- slin

Quad no idea

Tricep/pec slin.

This is all me personally

As far as inches depends on u and the size of us muscle group

 

[Robdjents]

I use 25 in glutes and delts...did triceps once but used a slin..
overall i use 25x1

 

[Jin]

25x1" works for everything.

 

[Bullseye Forever]

I use 23g x 1” on everything! I draw mine with a 20g x 1 1/2

 

[snake]

1" is good for damn near every spot so order that next time. 20-21g to draw, 23-25 to pin.

If you're pinning some thick gear, consider the 23g. I recently have moved to 23g from 25g; the inject is smother and there's no additional stick pain.

 

[jennerrator]

25x1" works for everything.

YEP....that was my answer!!!!!

 

[Bullseye Forever]

I messed up one time and drew out with my 20g and forgot to change needles and i stabbed my quad and about passed out

 

[Yaya]

And they are very easy to find online

 

[HollyWoodCole]

1" is good for damn near every spot so order that next time. 20-21g to draw, 23-25 to pin.

If you're pinning some thick gear, consider the 23g. I recently have moved to 23g from 25g; the inject is smother and there's no additional stick pain.

I've been planning on moving to a 23 from the 25 because it seems to take forever. Sometimes takes me two minutes to get the plunger down with my current BD 25's. Thanks for posting Snakey Snoo.

 

[Elivo]

I use a 23 1 inch for everything, glutes you may need a 1.25 or a 1.5, depends on how much youre packing back there.
I had used a 25G at first but it takes so long to inject when its test i switched to a larger bore.

A lot of it is personal preference too. Ive even used a 21g to inject with but thats me, larger size needles dont bother me at all.

Also depends on what you are injecting, test is super thick so a larger bore will make that easier, but ive heard things like mast are not as thick so a smaller one will do fine with that.
I only have exp with test.

 

[Bullseye Forever]

I use a 23 1 inch for everything, glutes you may need a 1.25 or a 1.5, depends on how much youre packing back there.
I had used a 25G at first but it takes so long to inject when its test i switched to a larger bore.

A lot of it is personal preference too. Ive even used a 21g to inject with but thats me, larger size needles dont bother me at all.

Also depends on what you are injecting, test is super thick so a larger bore will make that easier, but ive heard things like mast are not as thick so a smaller one will do fine with that.
I only have exp with test.

Dude big needles hurts like heck lol!! I used to use 25g but just took to long,I’ve been on 23g for many years!

 

[gymrat827]

i use slins just because i bought a ton for gh, delt/tri's

25g/1in for pretty much everything else.

 

[PFM]

28 X 1/2" slin pin for: pecs, abs, delts, calves, VG, glutes or anywhere you can reach.

 

[GenuineTomato]

Will a Test 300 oil go through a 25G needle?

 

[Yaya]

Will a Test 300 oil go through a 25G needle?

I was told only a test 275 oil would go through a 25g needle

 

[Yaya]

Putting a test 300 oil into a 25g would be asking for TROUBLE

 

[Oblivious]

I use 23g x 1” on everything! I draw mine with a 20g x 1 1/2

23 to pin? monster

 

[Bullseye Forever]

I was told only a test 275 oil would go through a 25g needle

If you get it to come out!! Will take forever

 

[Elivo]

Will a Test 300 oil go through a 25G needle?

You will be there a while with that one. I use 23g for test and no problems.