Results 1 to 15 of 15
  1. #1
    Elite Lulu66's Avatar
    Join Date
    Apr 2012
    Posts
    1,100
    Thanks
    0
    Thanked 7 Times in 7 Posts

    Mixing compounds in vials

    Is it ok to mix different compounds in the same vial. For example npp and test prop or test e and test pp. I know its common practice to inject these compounds mixed in the same syrenge. But would there be any adverse effects if the compounds sitting in the vial for extended periods of time. Since compounds have diffferent ba bb ratios and the like?
    US Goverment Policy: If It Ain't Broken, Fix It Till It Is.

  2. #2
    Elite PillarofBalance's Avatar
    Join Date
    Feb 2012
    Posts
    20,511
    Thanks
    2,146
    Thanked 18,093 Times in 7,795 Posts

    Re: Mixing compounds in vials

    just to clarify, you're not talking about your compounding pharmacy blending it, you're talking about you drawing x amount of compound A and mixing it with x amount of compound B in sterile vial Y?
    "Overzealous dosing" -Jin

    Rest in Peace Robot Lord. First round of Natty Boh is on me when I make it up there with you brother.

  3. #3
    Elite Lulu66's Avatar
    Join Date
    Apr 2012
    Posts
    1,100
    Thanks
    0
    Thanked 7 Times in 7 Posts

    Re: Mixing compounds in vials

    Yes just drawing from vials and mixing it on a separate one since these compounds would be injected together anyways.
    US Goverment Policy: If It Ain't Broken, Fix It Till It Is.

  4. #4
    Elite LeanHerm's Avatar
    Join Date
    Apr 2012
    Posts
    6,428
    Thanks
    1,339
    Thanked 2,411 Times in 1,186 Posts

    Re: Mixing compounds in vials

    Only thing I say is its the same problem as this tri blend. You can't change dosages if you have too.

  5. #5
    Elite Cobra Strike's Avatar
    Join Date
    Apr 2012
    Location
    Smack Center
    Posts
    2,614
    Thanks
    998
    Thanked 1,661 Times in 705 Posts

    Re: Mixing compounds in vials

    I would say that this is a bad idea. Different gear doesnt mix well...doesnt mix evenly. For example...when you put test and tren in the same syringe one will sink to the bottom (cant remember which one)...Just stick with drawing them out of their respective vials

    Blended hormones, such as the tri compound herm talks about left and right, have all the hormones (raw powders) cooked together in the same batch so they are mixed evenly

  6. #6
    Member cranium85's Avatar
    Join Date
    May 2012
    Location
    East Coast
    Posts
    4
    Thanks
    0
    Thanked 0 Times in 0 Posts

    Re: Mixing compounds in vials

    yeah i think cobra is right...i would think one( the heavy ester) would sink to the bottom. Then when u go to draw u may think you drawing out 150mgs of Prop and 200mgs or Eth...when in reality your drawing out all prop...or mostly prop with a little eth

    idk just my reasoning...also i'm not a chemistry and have never brewed my own gear. but def types of gear consits of def compounds which chemically are going to have different weights...so in the long run like CS said they will seperate and one will rise, one will sink.
    like oil in water. The oil ways less so it floats to the top...except in this case it would be two dif oils with to dif weights.

    just my opionion tho....i only comment because i've thought of this myself before and then came to the conclusion that it'd prob a stupid idea
    "Leave the gun, take the cannoli's"

  7. #7
    Zeek
    Guest

    Re: Mixing compounds in vials

    One week you might be injecting just one compound and the next 75 of one and 25% of another. As Cobra stated the blends are prepared from the raws, heated and blended together to be more uniform and even in their distribution throughout the entire batch.

  8. #8
    Elite gymrat827's Avatar
    Join Date
    Dec 2011
    Location
    shy town
    Posts
    6,763
    Thanks
    201
    Thanked 1,794 Times in 1,266 Posts

    Re: Mixing compounds in vials

    Originally Posted by Cobra Strike View Post
    I would say that this is a bad idea. Different gear doesnt mix well...doesnt mix evenly. For example...when you put test and tren in the same syringe one will sink to the bottom (cant remember which one)...Just stick with drawing them out of their respective vials

    Blended hormones, such as the tri compound herm talks about left and right, have all the hormones (raw powders) cooked together in the same batch so they are mixed evenly

    good post




    .

  9. #9
    Elite. SFGiants's Avatar
    Join Date
    Apr 2012
    Location
    In A Vagina
    Posts
    6,413
    Thanks
    4,906
    Thanked 5,344 Times in 2,259 Posts

    Re: Mixing compounds in vials

    Originally Posted by Cobra Strike View Post
    I would say that this is a bad idea. Different gear doesnt mix well...doesnt mix evenly. For example...when you put test and tren in the same syringe one will sink to the bottom (cant remember which one)...Just stick with drawing them out of their respective vials

    Blended hormones, such as the tri compound herm talks about left and right, have all the hormones (raw powders) cooked together in the same batch so they are mixed evenly
    Great post, I tried to make Test C / Mast E and the 2 didn't go well at all it was a fail.

    I don't care for Test E and with that it would have worked but rather have Test C

    I mixed everything I have run in a syringe but never vial to vial you must brew it to suspend together to have a mix.
    Knock Em Down and Keep Em Down!

  10. #10
    Banned Tilltheend's Avatar
    Join Date
    May 2012
    Posts
    1,124
    Thanks
    0
    Thanked 4 Times in 4 Posts

    Re: Mixing compounds in vials

    Your best bet is to switch pins and put them in the same syringe if need be.

  11. #11
    Elite. SFGiants's Avatar
    Join Date
    Apr 2012
    Location
    In A Vagina
    Posts
    6,413
    Thanks
    4,906
    Thanked 5,344 Times in 2,259 Posts

    Re: Mixing compounds in vials

    Originally Posted by Mr.Louaghos View Post
    Your best bet is to switch pins and put them in the same syringe if need be.
    No need to switch drawing pins but NEVER mix a water base with oil base I don't even think I would mix water base just oil base.
    Knock Em Down and Keep Em Down!

  12. #12
    Elite Cobra Strike's Avatar
    Join Date
    Apr 2012
    Location
    Smack Center
    Posts
    2,614
    Thanks
    998
    Thanked 1,661 Times in 705 Posts

    Re: Mixing compounds in vials

    Originally Posted by SFGiants View Post
    No need to switch drawing pins but NEVER mix a water base with oil base I don't even think I would mix water base just oil base.
    its fine to mix water with oil bro...I do it all the time...hcg and gear in one syringe BAM! Looks funky as hell though

  13. #13
    Elite PFM's Avatar
    Join Date
    Apr 2012
    Location
    Motor City
    Posts
    2,870
    Thanks
    256
    Thanked 727 Times in 347 Posts

    Re: Mixing compounds in vials

    Originally Posted by Cobra Strike View Post
    I would say that this is a bad idea. Different gear doesnt mix well...doesnt mix evenly. For example...when you put test and tren in the same syringe one will sink to the bottom (cant remember which one)...Just stick with drawing them out of their respective vials

    Blended hormones, such as the tri compound herm talks about left and right, have all the hormones (raw powders) cooked together in the same batch so they are mixed evenly
    I am with Cobra on this for the reasons he mentioned are spot on. Another reason is keeping your gear sterile. Every time you draw you pick up "bugs" and it can lead to more problems.

    I have been Syringe mixing for years and it allows a guy NOT being locked into his mgs. IMO especially on shorts a guy may want to add a line of Prop next pin or drop the Tren. Once you mixed a "blend" you are owned.
    Thugs
    Don't
    Matter

  14. #14
    Elite Cobra Strike's Avatar
    Join Date
    Apr 2012
    Location
    Smack Center
    Posts
    2,614
    Thanks
    998
    Thanked 1,661 Times in 705 Posts

    Re: Mixing compounds in vials

    Originally Posted by Crazy F Mike View Post
    I am with Cobra on this for the reasons he mentioned are spot on. Another reason is keeping your gear sterile. Every time you draw you pick up "bugs" and it can lead to more problems.

    I have been Syringe mixing for years and it allows a guy NOT being locked into his mgs. IMO especially on shorts a guy may want to add a line of Prop next pin or drop the Tren. Once you mixed a "blend" you are owned.
    this is why I dont like blends to begin with...no point in it

  15. #15
    Banned Tilltheend's Avatar
    Join Date
    May 2012
    Posts
    1,124
    Thanks
    0
    Thanked 4 Times in 4 Posts

    Re: Mixing compounds in vials

    Originally Posted by SFGiants View Post
    No need to switch drawing pins but NEVER mix a water base with oil base I don't even think I would mix water base just oil base.
    I'm talking about switching pins before injecting so the needle isn't dull entering the body.

Similar Threads

  1. Mixing oil based and water based compounds
    By SteelBlue in forum Anabolic Steroid Cycle Discussion
    Replies: 17
    Last Post: 10-23-2013, 03:46 PM
  2. forgot to wipe off vials before mixing GH
    By username1 in forum Anabolic Steroids
    Replies: 26
    Last Post: 01-15-2013, 09:44 PM
  3. Warming your gear and mixing multiple compounds
    By transcend2007 in forum Anabolic Steroids
    Replies: 12
    Last Post: 11-26-2012, 12:10 AM
  4. Mixing different esters - yes/no/do's/dont's????
    By pirovoliko in forum Anabolic Steroids
    Replies: 9
    Last Post: 09-18-2012, 12:53 PM
  5. Mixing question:
    By bah1a in forum Female Anabolics Discussion
    Replies: 6
    Last Post: 08-02-2012, 08:36 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •