Page 1 of 2 12 LastLast
Results 1 to 20 of 28
  1. #1
    Banned
    Join Date
    Jul 2012
    Posts
    454
    Thanks
    17
    Thanked 25 Times in 22 Posts

    looking to try primo

    Looking to homebrew some primo to run with the next cycle and trying to gather up as much info as possible on both the brewing and the compound.

  2. #2
    Elite RowdyBrad's Avatar
    Join Date
    May 2012
    Posts
    1,118
    Thanks
    3
    Thanked 79 Times in 64 Posts

    Re: looking to try primo

    good luck bro, seems primo is a little harder. maybe it is just from the cost of a screw up.

    Maybe AZOG will hop in, think his was good

  3. #3
    Elite Azog's Avatar
    Join Date
    Jun 2012
    Posts
    2,966
    Thanks
    539
    Thanked 591 Times in 400 Posts

    Re: looking to try primo

    Just google "basskiller calculator" and use the following figures:
    2% BA
    20% BB
    50% GSO and 50% EO for the remainder

    Worked like a charm for me at 200mg/ml.

    As far as what sort of changes/results you can expect, there is plenty of info on that if you look about. I can't comment yet since my cycle is only 3weeks old. Should be like lowish dose tren if run at 800-1000mg/week. It should be run for a long time tho. I am running mine for 25 weeks...at least haha.

  4. #4
    Banned
    Join Date
    Jul 2012
    Posts
    454
    Thanks
    17
    Thanked 25 Times in 22 Posts

    Re: looking to try primo

    Been looking on basskiller and ology.

  5. #5
    Palestinean Prophet Yaya's Avatar
    Join Date
    Jun 2012
    Location
    Wally World
    Posts
    7,121
    Thanks
    1,181
    Thanked 4,418 Times in 2,135 Posts

    Re: looking to try primo

    dying to do some primo!!
    There's nothing like a slice of tiller to get your day started -PFM

    Dizz - you're white. Please dont say nigga - DieYoungStrong

    DONALD TRUMP 2016

  6. #6
    Elite beasto's Avatar
    Join Date
    May 2012
    Posts
    796
    Thanks
    10
    Thanked 5 Times in 4 Posts

    Re: looking to try primo

    Bass should chime in on this, Primo is yummmy..I will be running 1g a week for 20plus coming in the winter!!!!!

  7. #7
    Senior Member Hockeyplaya18's Avatar
    Join Date
    Apr 2012
    Location
    Chicago
    Posts
    534
    Thanks
    16
    Thanked 5 Times in 5 Posts

    Re: looking to try primo

    Originally Posted by Azog View Post
    Just google "basskiller calculator" and use the following figures:
    2% BA
    20% BB
    50% GSO and 50% EO for the remainder

    Worked like a charm for me at 200mg/ml.

    As far as what sort of changes/results you can expect, there is plenty of info on that if you look about. I can't comment yet since my cycle is only 3weeks old. Should be like lowish dose tren if run at 800-1000mg/week. It should be run for a long time tho. I am running mine for 25 weeks...at least haha.
    Yo bro, why the EO?? Does primo not hold in GSO + bb and ba?? Idk about you but I would rather never brew with EO, seems like 0 fun, not the healthiest of compounds to be injecting. Just my OP, Im interested to hear what you have to say.
    I SCORED A GOAL ONCE......

  8. #8
    Elite RowdyBrad's Avatar
    Join Date
    May 2012
    Posts
    1,118
    Thanks
    3
    Thanked 79 Times in 64 Posts

    Re: looking to try primo

    i believe a buddy around was going to do high mg/ml and doesn't use eo ever, but it will be trial and error and he is a pro

  9. #9
    Banned
    Join Date
    Jul 2012
    Posts
    454
    Thanks
    17
    Thanked 25 Times in 22 Posts

    Re: looking to try primo

    I'd be a willing guinea pig rowdy!

  10. #10
    Zeek
    Guest

    Re: looking to try primo

    If you are looking to home brew primo be sure of one thig your chances of being let down are over 80% Legit quality primo is extrmemely difficult to procure and even when you do find it on a list of a reputable raw source the quality of that primo is usually shit. Why is this the case? I don't know but it is.
    it seems the only really good primo that I have seen was obtained from a reputable source but behind thatwas a huge amount purchases so that the source still made money selling the raws to the UGL person. Just because you see it on emmas list or one of the other decent raw ppls lists does notmean it is good!! actually far from it.


    sorry ot be a downer bro but felt you should know the dirty little secret about primo that nobody seems to want to explain

  11. #11
    Elite beasto's Avatar
    Join Date
    May 2012
    Posts
    796
    Thanks
    10
    Thanked 5 Times in 4 Posts

    Re: looking to try primo

    Ez is over here dropping bombs hahha...but the truth will set you free!!! Primo 300 would be nice

  12. #12
    Zeek
    Guest

    Re: looking to try primo

    Originally Posted by beasto View Post
    Ez is over here dropping bombs hahha...but the truth will set you free!!! Primo 300 would be nice
    primo 300 would cripple you and me beasto!! the 250 I am on is already about the top of the primo mgs you can go and live to tell it.

  13. #13
    Elite Jada's Avatar
    Join Date
    Apr 2012
    Posts
    5,298
    Thanks
    2,417
    Thanked 780 Times in 594 Posts

    Re: looking to try primo

    Dame! It sounds like it hurts like hell:0
    Eating ass is anabolic. .. Stick your tongue in and hold it there for 20 seconds! Wise words from
    TRODIZZLE

  14. #14
    Zeek
    Guest

    Re: looking to try primo

    throwing in here that I did a shot of 3cc of total primo in my right pec. 1cc was the primo 250 and 2cc were the primo 100. The mxing of the two primo strengths was the needed trick to stop any pip and lumps. Woke up this morning perfect! no soreness, lumps and can't even tell I did a shot into that pec and it wqs 3cc.

  15. #15
    Traptheend AndroSport's Avatar
    Join Date
    Jun 2012
    Location
    Good ol US of fukkin A
    Posts
    1,813
    Thanks
    63
    Thanked 206 Times in 106 Posts

    Re: looking to try primo

    Originally Posted by Ezekiel View Post
    throwing in here that I did a shot of 3cc of total primo in my right pec. 1cc was the primo 250 and 2cc were the primo 100. The mxing of the two primo strengths was the needed trick to stop any pip and lumps. Woke up this morning perfect! no soreness, lumps and can't even tell I did a shot into that pec and it wqs 3cc.
    Was wondering about this exactly... figured it would thin it out. Good to know!!!

  16. #16
    Senior Member Get Some's Avatar
    Join Date
    Nov 2011
    Posts
    875
    Thanks
    35
    Thanked 471 Times in 205 Posts

    Re: looking to try primo

    Just a quick tip for avoiding PIP on high mg stuff....

    draw your compound into the syringe, heat a cup of water in the microwave until it gets pretty hot, stick the syringe in the cup (with the needle cap on) and let it sit in there for a about 1-2 minutes. It needs to be a tall cup that you can fill all the way up with water so it covers the entire part of the syringe where the oil is. When you pull it out you should feel the heat of the oil to the touch through the syringe. From there just perform the normal injection procedure. You should notive the viscosity has changed and the oil will slide through the needle much easier. The next day you will feel far less pain because the oil will sit more confortably at a higher temperature. I do this every single time and have never once had a problem I won't ever inject cold again!

    Primo at 150mg/ml is about the highest you can go without using EO and taking a huge risk. At 200-250mg/ml, trying to fit 2 to 2.5 grams of primo powder in 10ml of oil becomes a task. I'm not a master brewer but have talked at length with several lab owners about the process. The man I believe to be one of the best brewers ever is currently trying to formulate a higher dose primo and I can say that he is not even sure how high it can be done and is being cautious. Can't wait for it tho!

  17. #17
    Elite Azog's Avatar
    Join Date
    Jun 2012
    Posts
    2,966
    Thanks
    539
    Thanked 591 Times in 400 Posts

    Re: looking to try primo

    Word.

    Just go with a proven UGL or use a diff compound. I wish I would have listened and done the same. Tren, here I come!

  18. #18
    Elite RowdyBrad's Avatar
    Join Date
    May 2012
    Posts
    1,118
    Thanks
    3
    Thanked 79 Times in 64 Posts

    Re: looking to try primo

    Can't wait GS. Loving the idea of Primo, hoping it is all I imagine.

  19. #19
    TriniJuice
    Guest
    Time capsule thread bump,
    I keep reading 200mg+ wont hold w/o EO but 150mg is the sweet spot
    Well what about a mg dosage between that? I've read 180mg was g2g but that seems 2close to the threshold
    I'm thinking if I wanted to run 1g week I could get away with 165 or 170mg/mL, this way I'd pin 2mL 3x a week
    Thought?

  20. #20
    Elite. DF's Avatar
    Join Date
    Apr 2012
    Posts
    8,292
    Thanks
    4,598
    Thanked 3,206 Times in 1,736 Posts
    I've pinned primo 250mg/ml the pip from that is not fukn joke. I've also done 125mg not bad at all.

Page 1 of 2 12 LastLast

Similar Threads

  1. Var and primo or primo alone???
    By atticus84 in forum Female Anabolics Discussion
    Replies: 22
    Last Post: 02-28-2016, 09:26 AM
  2. Replies: 39
    Last Post: 07-27-2012, 07:14 PM
  3. Lets try again
    By 0tj0 in forum New Members Introductions
    Replies: 18
    Last Post: 06-25-2012, 08:06 PM
  4. 2nd try...
    By jimbo79 in forum New Members Introductions
    Replies: 22
    Last Post: 04-21-2012, 04:09 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •