Results 1 to 16 of 16
  1. #1
    Senior Member
    Join Date
    Sep 2012
    Posts
    1,021
    Thanks
    0
    Thanked 3 Times in 3 Posts

    Best way to warm up gear before pinning

    Guys,

    Sorry for what seems to be a stupid question but Id really like to know the best way to warm up gear pre-pin to make the pin smoother and easier. Never had an issue, but would like to know just in case.

    I know most ways include either placing the vial in hot water, or syringe in hot water , or blow drying the /vial syringe...but Im most worried about doing it right, whatever the method, to preserve sterility.

    So give me your terchniques and please try and be as specific as you can when it comes to sterility. Thanks

  2. #2
    Member UltraAlmondy's Avatar
    Join Date
    Jul 2012
    Posts
    17
    Thanks
    0
    Thanked 0 Times in 0 Posts

    Re: Best way to warm up gear before pinning

    When I first started I would draw then place the needle cap back on and then run the syringe under hot water, making sure to avoid the needle/cap if possible. Helps injection a bit but you really don't need to--I would probably start doing it again if I start going 2+ cc at one time.

  3. #3
    Member 4everBulking's Avatar
    Join Date
    Sep 2012
    Posts
    6
    Thanks
    0
    Thanked 0 Times in 0 Posts

    Re: Best way to warm up gear before pinning

    i have never warmed up my gear before pinning...

  4. #4
    Elite JOMO's Avatar
    Join Date
    May 2012
    Posts
    2,231
    Thanks
    297
    Thanked 178 Times in 129 Posts

    Re: Best way to warm up gear before pinning

    Originally Posted by UltraAlmondy View Post
    When I first started I would draw then place the needle cap back on and then run the syringe under hot water, making sure to avoid the needle/cap if possible. Helps injection a bit but you really don't need to--I would probably start doing it again if I start going 2+ cc at one time.
    This is what I do. And over 2cc's.
    "There are only two days in the year nothing can be done. One is called yesterday and the other is called tomorrow"

  5. #5
    Senior Moderator NbleSavage's Avatar
    Join Date
    Apr 2012
    Posts
    10,974
    Thanks
    19,278
    Thanked 9,831 Times in 4,909 Posts

    Re: Best way to warm up gear before pinning

    1) Heat 1" of water in a coffee cup in your microwave for 2 minutes.
    2) Place bottles in warm water. Let stand for 1-2 mins.
    3) Fill pin with warm oil.
    4) ???
    5) Profit.

  6. #6
    Elite PillarofBalance's Avatar
    Join Date
    Feb 2012
    Posts
    20,496
    Thanks
    2,144
    Thanked 18,091 Times in 7,788 Posts

    Re: Best way to warm up gear before pinning

    Preserve sterility? I fill a glass with hot tap water and let the syringe sit in it. You're not going to hurt yourself like this... or by letting the vial sit in hot water. If I have time I'll soak my syringes otherwise I just pin it.
    "Overzealous dosing" -Jin

    Rest in Peace Robot Lord. First round of Natty Boh is on me when I make it up there with you brother.

  7. #7
    Elite Big Worm's Avatar
    Join Date
    Jul 2012
    Posts
    1,379
    Thanks
    492
    Thanked 921 Times in 411 Posts

    Re: Best way to warm up gear before pinning

    I use my girls hair dryer.

  8. #8
    Elite gymrat827's Avatar
    Join Date
    Dec 2011
    Location
    shy town
    Posts
    6,762
    Thanks
    201
    Thanked 1,795 Times in 1,266 Posts

    Re: Best way to warm up gear before pinning

    Originally Posted by UltraAlmondy View Post
    When I first started I would draw then place the needle cap back on and then run the syringe under hot water, making sure to avoid the needle/cap if possible. Helps injection a bit but you really don't need to--I would probably start doing it again if I start going 2+ cc at one time.
    x2x........

  9. #9
    Elite 63Vette's Avatar
    Join Date
    Jun 2012
    Posts
    2,256
    Thanks
    6
    Thanked 28 Times in 12 Posts

    Re: Best way to warm up gear before pinning

    Originally Posted by Big Worm View Post
    I use my girls hair dryer.
    Blow dryer... takes about 1 minute...

  10. #10
    Elite. SFGiants's Avatar
    Join Date
    Apr 2012
    Location
    In A Vagina
    Posts
    6,429
    Thanks
    4,931
    Thanked 5,368 Times in 2,258 Posts

    Re: Best way to warm up gear before pinning

    Originally Posted by PillarofBalance View Post
    Preserve sterility? I fill a glass with hot tap water and let the syringe sit in it. You're not going to hurt yourself like this... or by letting the vial sit in hot water. If I have time I'll soak my syringes otherwise I just pin it.
    This is why you alcohol swab the vial after it's warm bro.
    Knock Em Down and Keep Em Down!

  11. #11
    Senior Member IWannaGetBig's Avatar
    Join Date
    Aug 2012
    Posts
    1,137
    Thanks
    533
    Thanked 281 Times in 196 Posts

    Re: Best way to warm up gear before pinning

    I rollup my pin in a heating pad for 10 minutes.

  12. #12
    Elite. SFGiants's Avatar
    Join Date
    Apr 2012
    Location
    In A Vagina
    Posts
    6,429
    Thanks
    4,931
    Thanked 5,368 Times in 2,258 Posts

    Re: Best way to warm up gear before pinning

    Zeek rolls the pin up his ass for 10 minute =))
    Knock Em Down and Keep Em Down!

  13. #13
    Elite JOMO's Avatar
    Join Date
    May 2012
    Posts
    2,231
    Thanks
    297
    Thanked 178 Times in 129 Posts

    Re: Best way to warm up gear before pinning

    Originally Posted by IWannaGetBig View Post
    I rollup my pin in a heating pad for 10 minutes.
    Hmm..never thought of that one. Just to find a heating pad here.
    "There are only two days in the year nothing can be done. One is called yesterday and the other is called tomorrow"

  14. #14
    Elite PFM's Avatar
    Join Date
    Apr 2012
    Location
    Motor City
    Posts
    2,869
    Thanks
    256
    Thanked 728 Times in 348 Posts

    Re: Best way to warm up gear before pinning

    I've never warmed gear unless it crashed. If you're in a really cold climate and storing your gear along an outside wall, move it inwards to a warmer storage location or simply keep what you pin on your cable box or some heat producing electronic device (if needed).

    If PIP is an issue....it's not the temp of the gear unless your pinning it straight from the fridge.

    If using a needle ga smaller then a 23 (IDK WTF guys do this for) then heating your gear may make sense, but using a 23 ga makes The Most Sense.
    Thugs
    Don't
    Matter

  15. #15
    Senior Member
    Join Date
    Sep 2012
    Posts
    1,021
    Thanks
    0
    Thanked 3 Times in 3 Posts

    Re: Best way to warm up gear before pinning

    No i use 23. never really had PIP, just thought id ask. Whatever PIP i experienced in the very beginning is now long gone by week 3...virgin muscle i guess

  16. #16
    Elite PFM's Avatar
    Join Date
    Apr 2012
    Location
    Motor City
    Posts
    2,869
    Thanks
    256
    Thanked 728 Times in 348 Posts

    Re: Best way to warm up gear before pinning

    Originally Posted by pirovoliko View Post
    No i use 23. never really had PIP, just thought id ask. Whatever PIP i experienced in the very beginning is now long gone by week 3...virgin muscle i guess
    I've used smaller ga, I always "stir" the needle more then the ga size is worth. So an easy push is worth the slightly larger hole. Unless a guy has Prop or Phenlyprop allergies or pinning water based conversions.....there is no reason for PIP.
    Thugs
    Don't
    Matter

Similar Threads

  1. Test e pinning question infection or reaction to gear?
    By Chopshop41588 in forum Anabolic Steroid Cycle Discussion
    Replies: 10
    Last Post: 02-21-2015, 09:46 PM
  2. gear is on the way
    By deejeff442 in forum Anabolic Steroids
    Replies: 40
    Last Post: 04-05-2014, 09:15 PM
  3. Do you warm your gear?
    By transcend2007 in forum Anabolic Steroids
    Replies: 65
    Last Post: 11-09-2013, 06:06 PM
  4. different way to warm gear
    By Capt'n Ron in forum Anabolic Steroids
    Replies: 27
    Last Post: 02-24-2013, 02:23 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •