I need some help drawing from my vial

Joined
Jul 4, 2012
Messages
9
Reaction score
0
Points
0
Ok...10ml vial of test prop...3mlx23x1.5" syringe.
So to draw 125mg, that would be .5 (half of 1cc) on my syringe right? or 1dash over .5 for 150 correct.
And 1cc (same vial/syringe) is = to 250mg right (for ethanate or cyp)...I think I'm right...just making sure
 

pirovoliko

Senior Member
Joined
Sep 13, 2012
Messages
1,021
Reaction score
4
Points
0
Whats the dose of yiur prop? Im assuming 100mg/ml. If it is you need to draw 1.25 cc's of prop
 

pirovoliko

Senior Member
Joined
Sep 13, 2012
Messages
1,021
Reaction score
4
Points
0
and 1cc is 250 mg for cyp and enth if its dosed at 250mg/ml. May not be the case so check..
 

IWannaGetBig

Senior Member
SI Founding Member
Joined
Aug 2, 2012
Messages
1,135
Reaction score
278
Points
0
Ok...10ml vial of test prop...3mlx23x1.5" syringe.
So to draw 125mg, that would be .5 (half of 1cc) on my syringe right? or 1dash over .5 for 150 correct.
And 1cc (same vial/syringe) is = to 250mg right (for ethanate or cyp)...I think I'm right...just making sure
First we have to establish what gear you have because you have mentioned 3. Prop, E, and Cyp.
1cc Slin pin
For the Prop, which is most likely 100mg, and you are going to use a 1cc syringe, then you need to pull all the way to the 1cc line. Get another 1cc pin and pull half way to the .5, this will equal 125mg.
For the E and Cyp, it's most likely 250mg. To get 125mg using a 1cc pin you'll need to pull to the .5.
Now in your post you mention this "3mlx23x1.5" syringe. It sounds like you have 3cc syringes.
On a 3 cc syringe there are 4 lines between each increment. Example 1....1.5....2 If you need 125mg of prop using a 3cc syringe pull past 1cc and somewhere around the 2nd and 3rd increment between 1 and 1.5
If you're pulling E or Cyp, which is most likely 250mg, and you're looking for 250mg, then pull until you hit 1cc
 

Popeye

Elite
SI Founding Member
Joined
Oct 27, 2012
Messages
1,564
Reaction score
634
Points
0
like said above....prop is more than likely 100mg/ml....meaning every 1ml has 100mgs of prop

1ml=1cc

If you have 3cc(3ml) syringe, that holds 300 mgs of prop if you fill whole barrel
 

Popeye

Elite
SI Founding Member
Joined
Oct 27, 2012
Messages
1,564
Reaction score
634
Points
0
If you have 3cc(3ml) syringe, that holds 300 mgs of prop if you fill whole barrel
And this is just a reference...you do not need 300 mgs of prop
 
Joined
Jul 4, 2012
Messages
9
Reaction score
0
Points
0
Yes...3ml syringe..10ml vial of prop 100
Ok...so its prop 100.(pinnacle).. So I fill to 1cc for 100mg correct? So 125 one is 1cc + couple dashs/or increments...and 150mg is half of my vial= 1.5 correct.
 

Popeye

Elite
SI Founding Member
Joined
Oct 27, 2012
Messages
1,564
Reaction score
634
Points
0
Yes...3ml syringe..10ml vial of prop 100
Ok...so its prop 100.(pinnacle).. So I fill to 1cc for 100mg correct? So 125 one is 1cc + couple dashs/or increments...and 150mg is half of my vial 1.5 correct.

Yes sir....
 

New Threads

Top