Results 1 to 15 of 15
  1. #1
    Elite transcend2007's Avatar
    Join Date
    Aug 2012
    Location
    Arizona
    Posts
    2,716
    Thanks
    696
    Thanked 1,738 Times in 906 Posts

    Injecting Multiple Compounds

    How do you guys use / mix multiple compounds together for a single injection.

    I will be mixing primo 100mg (1.5 ml), primo 250mg (1ml), and test c 250mg (.5 ml).

    I will be injecting 800mgs of primo weekly along with 250mgs of test c. I plan to divide this amount into 2 equal weekly injections (6 total mls injected per week).

    My thought was to purchase 20ml sterile vials to mix the compounds together in my desire ratios and then draw my combined compounds as needed.

    Once I place the three compounds together in 1 vial how do I mix them to know I will have equal distribution when drawing them later? Will I need to heat them or do anything other than shake them up really well?

    I appreciate you guys who do multiple compounds sharing your experiences.

  2. #2
    Senior Member cougar's Avatar
    Join Date
    Oct 2012
    Location
    Never Never Land
    Posts
    135
    Thanks
    2
    Thanked 0 Times in 0 Posts

    Re: Injecting Multiple Compounds

    Thats a Great Question brother,I have no clue on that one,but I allways heat my bottles. But that's not your question, sorry. Some brothers will chime in,I'm sure.

  3. #3
    Elite Jada's Avatar
    Join Date
    Apr 2012
    Posts
    5,308
    Thanks
    2,422
    Thanked 788 Times in 600 Posts

    Re: Injecting Multiple Compounds

    My brother trans I don't like that idea just too much work for me , I rather draw from each one from one syringe and pin. I rather have that blend made ready to pin than for me to take a chance and make a mistake and put some foreign bacteria in me.
    Eating ass is anabolic. .. Stick your tongue in and hold it there for 20 seconds! Wise words from
    TRODIZZLE

  4. #4
    Senior Member Sherk's Avatar
    Join Date
    Nov 2012
    Posts
    35
    Thanks
    0
    Thanked 0 Times in 0 Posts

    Injecting Multiple Compounds

    I wouldn't mix it up in a vial. There's no way to tell if you're getting the right dosage of each and more than likely you're not. Use a 3ml syringe and draw up 1.5 of your primo then 1ml of the other and .5ml of the other then inject. That's a fool proof way of doing this. That's the procedure I do when injecting multiple compounds.

  5. #5
    Palestinean Prophet Yaya's Avatar
    Join Date
    Jun 2012
    Location
    Wally World
    Posts
    7,223
    Thanks
    1,216
    Thanked 4,510 Times in 2,187 Posts

    Re: Injecting Multiple Compounds

    I would never mix in a vial but in a single shot, why not??ive done it many times..as long as its oil ur mixing then go for it.
    There's nothing like a slice of tiller to get your day started -PFM

    Dizz - you're white. Please dont say nigga - DieYoungStrong

    DONALD TRUMP 2016

  6. #6
    Member
    Join Date
    Nov 2012
    Posts
    42
    Thanks
    0
    Thanked 0 Times in 0 Posts

    Re: Injecting Multiple Compounds

    Agreed, i wouldnt mix in a vial either. Once you mix the compounds in a vial, there is no turning back. But if you leave them seperate and mix in your pin as stated above, then you can tweak the mix if you have to.
    Besides, what if one of the vials is contaminated for some reason, then you will contaminate your whole cycle. Just my .02 cents.

  7. #7
    Elite DF's Avatar
    Join Date
    Apr 2012
    Posts
    8,382
    Thanks
    4,927
    Thanked 3,340 Times in 1,791 Posts

    Re: Injecting Multiple Compounds

    What Tranny is trying to do here is knock some if that bite out of the primo 250. I can't say I blame him... Lol. I've just been mixing 1weeks worth of Primo in the 100 vial. I end up with 7 ml of Primo mixed. Then I just warm in hot water & pin from that vial for the week. It's about 2.3ml x 3 injects M,W,F. The test dose is low so I just slin pin my delt.

    I'm not sure how well the Primo 250 & 100 will mix in the syringe. Only one way to find out brother.

  8. #8
    Elite Christosterone's Avatar
    Join Date
    Oct 2012
    Location
    Texas
    Posts
    1,026
    Thanks
    16
    Thanked 16 Times in 16 Posts

    Re: Injecting Multiple Compounds

    I usually mix in a single syringe
    All posts are for entertainment purposes only

  9. #9
    Elite 63Vette's Avatar
    Join Date
    Jun 2012
    Posts
    2,256
    Thanks
    6
    Thanked 28 Times in 12 Posts

    Re: Injecting Multiple Compounds

    Mixing in a single syringe is very common. I have mixed pretty much everything lol ... just pull it, heat it, and shoot it bro.

    Mixing in a vial- not a fan. I would say don't do it. A lot of UGLs have trouble with certain blends so the thought and risk of just throwing together some and letting them sit, then pulling and shooting it.... naw.... not me bro.

    Looks like you have a nice cycle set up though brother so pin that stack and enjoy!

    Much Respect,
    Vette
    Hung like Einstein and Smart as a Mule.

  10. #10
    Senior Member
    Join Date
    Sep 2012
    Posts
    1,021
    Thanks
    0
    Thanked 3 Times in 3 Posts

    Re: Injecting Multiple Compounds

    Single syringe is best. I do it all the time..

  11. #11
    Member
    Join Date
    Nov 2012
    Posts
    7
    Thanks
    0
    Thanked 0 Times in 0 Posts

    Re: Injecting Multiple Compounds

    Where will you be pinning this 3ml at a time, you should probably think about that a bit. You shouldn't do 3ml into delts about the only place I see 3ml going is deep into the glute. I would come up with some sort of pinning strategy you wouldn't want to pin 6ml in a week into one cheek, it's just begging for trouble. I think one of the reasons I have chronic pain in my left glute is because I pinned to many ml weekly for long periods 3ml at a time (theres another reason too but a story for another day right now it's about you), 3x a week or more if I happened to be on suspension...I suggest spreading the pins out amongst your glutes delts thighs for starters 6 spots.

    Just looking out for you, your call here

  12. #12
    Elite biggerben692000's Avatar
    Join Date
    May 2012
    Posts
    1,252
    Thanks
    51
    Thanked 204 Times in 122 Posts

    Re: Injecting Multiple Compounds

    Originally Posted by transcend2007 View Post
    How do you guys use / mix multiple compounds together for a single injection.

    I will be mixing primo 100mg (1.5 ml), primo 250mg (1ml), and test c 250mg (.5 ml).

    I will be injecting 800mgs of primo weekly along with 250mgs of test c. I plan to divide this amount into 2 equal weekly injections (6 total mls injected per week).

    My thought was to purchase 20ml sterile vials to mix the compounds together in my desire ratios and then draw my combined compounds as needed.

    Once I place the three compounds together in 1 vial how do I mix them to know I will have equal distribution when drawing them later? Will I need to heat them or do anything other than shake them up really well?

    I appreciate you guys who do multiple compounds sharing your experiences.
    I'm decent with math and dosing.You said 100mg primo is 1.5ml? Is the primo dosed at 75mg/ml? It would have to be if this is what you're saying?
    Then 250mg of test c is .5ml? That would make your test c 500mg/ml which wouldn't hold. It's a bitch at 250mg/ml at times.

    All this nonsense about transferring this and that...you're inviting contamination. Just draw from each bottle each time. Don't try and make this difficult.
    I've grown up some.

  13. #13
    Elite g0re's Avatar
    Join Date
    Oct 2012
    Posts
    867
    Thanks
    4
    Thanked 9 Times in 7 Posts

    Re: Injecting Multiple Compounds

    Originally Posted by biggerben692000 View Post
    I'm decent with math and dosing.You said 100mg primo is 1.5ml? Is the primo dosed at 75mg/ml? It would have to be if this is what you're saying?
    Then 250mg of test c is .5ml? That would make your test c 500mg/ml which wouldn't hold. It's a bitch at 250mg/ml at times.

    All this nonsense about transferring this and that...you're inviting contamination. Just draw from each bottle each time. Don't try and make this difficult.

    Na, he means he's doing 1.5ml of primo 100 (150mg total)

    .5ml of test 250 (125mg total)

    And 1ml of primo 250 (250mg total)


    Not that hard to figure out

  14. #14
    Elite transcend2007's Avatar
    Join Date
    Aug 2012
    Location
    Arizona
    Posts
    2,716
    Thanks
    696
    Thanked 1,738 Times in 906 Posts

    Re: Injecting Multiple Compounds

    Thanks guys for the info. Just extract the needed ml's from each of the 3 vials for each shot. That's easy enough. Would you recommend changing out the needle each time or can I just use the same drawing needle for all three?

    Pmac, yes I have thought a lot about injections sits. Luckily it’s a topic well covered on SI. I plan to use glutes, ventro-glutes, and thighs (thing I'll split into 1.5ml for each leg). I may consider adding delts with the same splitting strategy.

    DF, yes my brother. You are right! I am trying to avoid the PIP that we know is likely from primo 250mgs. I appreciate your warming the compound idea. I will definitely going to do that. And, knowing going in it’s a 6 month cycle I would love to keep the PIP to a min. I will also state I am very thankful for the primo 250mg because it will eliminate 2 - 4ml's (20%-40%) of the oil volume of running primo 800mg-1,000mg per week.


    Originally Posted by pmac View Post
    Where will you be pinning this 3ml at a time, you should probably think about that a bit. You shouldn't do 3ml into delts about the only place I see 3ml going is deep into the glute. I would come up with some sort of pinning strategy you wouldn't want to pin 6ml in a week into one cheek, it's just begging for trouble. I think one of the reasons I have chronic pain in my left glute is because I pinned to many ml weekly for long periods 3ml at a time (theres another reason too but a story for another day right now it's about you), 3x a week or more if I happened to be on suspension...I suggest spreading the pins out amongst your glutes delts thighs for starters 6 spots.

    Just looking out for you, your call here

  15. #15
    Elite transcend2007's Avatar
    Join Date
    Aug 2012
    Location
    Arizona
    Posts
    2,716
    Thanks
    696
    Thanked 1,738 Times in 906 Posts

    Re: Injecting Multiple Compounds

    >>>>^^^^ g0retekz that is what I meant ^^^^<<<<


    Originally Posted by g0retekz View Post
    Na, he means he's doing 1.5ml of primo 100 (150mg total)

    .5ml of test 250 (125mg total)

    And 1ml of primo 250 (250mg total)


    Not that hard to figure out

Similar Threads

  1. Do not buy multiple size needles
    By Lulu66 in forum Anabolic Steroids
    Replies: 17
    Last Post: 12-03-2017, 09:57 AM
  2. Pinning multiple compounds
    By kittensandkilos in forum Anabolic Steroids
    Replies: 8
    Last Post: 02-07-2017, 12:43 PM
  3. General thoughts on skwatz multiple times a week?
    By StoicHouse in forum Training and Workouts
    Replies: 12
    Last Post: 05-14-2016, 08:04 AM
  4. Recovering from multiple short cycles vs fewer long ones
    By widehips71 in forum Anabolic Steroid Cycle Discussion
    Replies: 16
    Last Post: 12-01-2014, 05:19 PM
  5. Warming your gear and mixing multiple compounds
    By transcend2007 in forum Anabolic Steroids
    Replies: 12
    Last Post: 11-26-2012, 12:10 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •