Results 1 to 8 of 8
  1. #1
    Elite K1's Avatar
    Join Date
    Aug 2012
    Posts
    470
    Thanks
    0
    Thanked 10 Times in 7 Posts

    Liquid Oral Conversions

    POWDER TO LIQUID ORAL CONVERSIONS:


    Anadrol
    Powder: per 1 gram of Oxymetholone
    Produces: Highest concentration made - 50 mg/ml

    Requirements:
    1 gram of Oxymetholone powder
    1 beaker suitable for holding the volume of liquids
    8.4 ml of PEG 300
    10.5 ml 190 Proof Grain Alcohol
    Anavar
    Powder: per 1 gram of Oxandrolone
    Produces: Highest concentration made - 20 mg/ml

    Anavar
    Requirements:
    1 gram of Oxandrolone powder
    1 beaker suitable for holding the volume of liquids
    9.8 ml of PEG 300
    39.2 ml of 190 Proof Grain Alcohol
    Armidex
    Powder: per 1 gram of Anastrozole
    Produces: Highest concentration made - 5 mg/ml

    Anastrozole
    Requirements:
    1 gram of Anastrozole powder
    1 beaker suitable for holding the volume of liquids
    19.9 ml of PEG 300
    179.1 ml of 190 Proof Grain Alcohol

    Clomid
    Powder: per 1 gram of Clomiphene Citrate
    Produces: Highest concentration made - 50 mg/ml

    Requirements:
    1 gram of Clomiphene Citrate
    1 beaker suitable for holding the volume of liquids
    7.6 ml of Glycerol
    11.3 ml of 190 Proof Grain Alcohol

    Clomid
    Powder: per 1 gram of Clomiphene Citrate
    Produces: Highest concentration made - 50 mg/ml

    Requirements:
    1 gram of Clomiphene Citrate
    1 beaker suitable for holding the volume of liquids
    8.4 ml of PEG 600
    10.5 ml of 190 Proof Grain Alcohol

    Dianabol
    Powder: per 1 gram of Methandrostenolone
    Produces: Highest concentration made - 50 mg/ml

    Requirements:
    1 gram of Methandrostenolone powder
    1 beaker suitable for holding the volume of liquids
    19 ml of 190 Proof Grain Alcohol

    Femara
    Powder: per 1 gram of Letrozole
    Produces: Highest concentration made - 5 mg/ml

    Requirements:
    1 gram of Letrozole powder
    1 beaker suitable for holding the volume of liquids
    19.9 ml of PEG 300
    179.1 ml of 190 Proof Grain Alcohol

    Nolvadex
    Powder: per 1 gram of Tamoxifen Citrate
    Produces: Highest concentration made - 20 mg/ml

    Requirements:
    1 gram of Tamoxifen Citrate
    1 beaker suitable for holding the volume of liquids
    19.6 ml of Glycerol
    29.4 ml of 190 Proof Grain Alcohol

    Nolvadex
    Powder: per 1 gram of Tamoxifen Citrate
    Produces: Highest concentration made - 20 mg/ml

    Requirements:
    1 gram of Tamoxifen Citrate
    1 beaker suitable for holding the volume of liquids
    9.8 ml of PEG 600
    39.2 ml of 190 Proof Grain Alcohol

    Proviron
    Powder: per 1 gram of Mesterolone
    Produces: Highest concentration made - 50 mg/ml

    Requirements:
    1 gram of Mesterolone
    1 beaker suitable for holding the volume of liquids
    8.4 ml of PEG 300
    10.5 ml of 190 Proof Grain Alcohol

    Winstrol
    Powder: per 1 gram of Stanozolol
    Produces: Highest concentration made - 25 mg/ml

    Requirements:
    1 gram of Stanozolol
    1 beaker suitable for holding the volume of liquids
    7.8 ml of PEG 300
    31.2 ml of 190 Proof Grain Alcohol


    For all of the above conversions requiring PEG and 190 Proof Alcohol, use the following procedure:
    place a sufficient amount of water in a pan and place on the stove
    remove from heat when the water reaches boiling temperature
    place the powder and the PEG in the beaker
    immerse the beaker in the pan of water so that the water is level with the top of the contents of the beaker
    gently swirl or stir the contents of the beaker until the solution is clear (reheat the water if necessary)
    remove the beaker from the water
    allow the PEG to cool down
    slowly add the 190 Proof Alcohol to the mixture
    gently stir until fully mixed
    For all of the above conversions where PEG is not required, use the following procedure:
    mix powder and 190 Proof Alcohol in the beaker
    gently swirl or stir the contents of the beaker until the solution is clear
    the majority of powders which do not require PEG will dissolve readily but for those that are troublesome, refer to the heating procedure as outlined above
    In the event that 190 Proof Grain Alcohol (EverClear) is unavailable, then substitute Bacardi 151.

    Flavoured oils can also be added to mask the taste if that is your preference.

  2. #2
    Elite K1's Avatar
    Join Date
    Aug 2012
    Posts
    470
    Thanks
    0
    Thanked 10 Times in 7 Posts
    Viagra 50mg/ml
    Take 1gram of Viagra and pour in 19ml of everclear (To get 50mg/ml--20ml by volume).

    Put some water in a pot and get it going to a nice boil. Lower the flame or shut it off.

    Put the vial containing the everclear/viagra mixture in the pot for three (3) minutes.

    make sure water level is adequate-about 3/4 the height of the vial.

    After three minutes take the vial out screw or cap it then shake.

    Keep your stove flame on enough to keep the water in the pot to a boil or near a boil.

    Put the vial back in the Boiling water for another 3 minutes.

    Shake again. You should be suspended now. Depending on quality (cut or not) of powder some people add peg300 ( varying amount until desired effect)to the mix but only if suspension fails with the everclear only.

    * Note some of the solution will evaporate in the boil so if you need to be dead on accurate you will want to add more everclear or peg to make up for the small amount lost.

  3. #3
    Elite K1's Avatar
    Join Date
    Aug 2012
    Posts
    470
    Thanks
    0
    Thanked 10 Times in 7 Posts
    More Viagra Conversions
    so you have 10 grams. You want to make 100mg caps or 100mg/ml.

    Liquid solution is easier. You simply take about 1000ml of solution and dilute. When I diluted I just used 1000ml of everclear. I put them in 50ml bottles with dropper and when I used it I just shake and draw. I did this for anavar powder too.


    Capsules can be time consuming. You decide what type of filler you want (light-low density) to use and take 990 grams of filler mix you ten grams of viagra mix very well for equal distribution then you get the big empty gel caps the "000" or is it the "0" size ( I forget)cap size I believe which hold up too 1000mg. that would give you 1000 caps with approx 100mg viagra and 900mg filler. or get the "00" 500mg caps and get 2000 50mg caps.

    The exact figure on caps will vary by a mg or two because it depends on the density of the filler. I never went that route because I dont have the patience for capping that much which is why online sources use liquid solution.....I dont know what they use as the filler but I notice that it settles at the bottom and you have to shake which is no biggie to shake a little for a boner.

  4. #4
    Elite K1's Avatar
    Join Date
    Aug 2012
    Posts
    470
    Thanks
    0
    Thanked 10 Times in 7 Posts
    40ml Cialis 25mg/ml
    Liquid Cialis

    There are two different ways to do this one is a suspension and for those of you who have to have a clear mix you can do that too.

    Things needed

    1gram cialis powder
    1 50ml sterile vial
    40ml of everclear or grain alcohol for the suspension version
    20ml PEG (Polyethylene Glycol)
    2ml super solvent for the clear version
    1 50ml dropper bottle

    Step 1.) Add the cialis to the vial
    Step 2.) Add either the everclear or super solvent depending on which version you want to make.
    Step 3.) place in a pan of hot water add heat until solutions are clear
    Step 4.) Remove from heat for the clear version you can add the PEG now and shake to mix, you can also heat the peg once added to the solvent as it is very thick, let both cool
    Step 5.) Place in the dropper bottle

    Please note once the suspension version cools it will be milky in color as not all the cialis will have dissolved. Simply shake this version before use to get a uniform dose of 25mg for the 40ml’s of solution made.

    On the clear version please be aware the taste in horrible and you can place 1/2ml into a gel cap as this version yields 50mg per ml.

    Warning purity of your raw material will dictate how well this works, if your powder has too many impurities the clear version will separate and turn to goop and adding extra solvent will not fix it as I tried double and triple amounts of solvent and it still crashed. Good powder yields good results on the clear version. If your powder is suspect use the suspension version. Or make a gram batch and see if its stable so you don’t waste all your powder.

    I can save you guys a LOT of time making liquid cialis.....

    just use 30-40% everclear and the rest a strong flavored kool-aid

    This willl give you a very clump free suspsension, you will then simply have to shake before use, but any moron can make this and anybody can get the chems needed also.

    Best to get some 30ml bottles with the 1ml droppers and just make a suspension. Taste isn't bad and takes about 2 minutes

  5. #5
    Member
    Join Date
    Oct 2017
    Posts
    2
    Thanks
    0
    Thanked 0 Times in 0 Posts
    do i have to use the alcohol can i jet use the peg

  6. #6
    Elite Bro Bundy's Avatar
    Join Date
    Apr 2012
    Posts
    10,348
    Thanks
    547
    Thanked 4,266 Times in 2,507 Posts
    Quote Originally Posted by tonyb73 View Post
    do i have to use the alcohol can i jet use the peg
    Very old thread u may need to start a new thread to get your answer

  7. #7
    Elite SFGiants's Avatar
    Join Date
    Apr 2012
    Location
    Jersey
    Posts
    5,285
    Thanks
    3,326
    Thanked 3,040 Times in 1,409 Posts
    Quote Originally Posted by Bro Bundy View Post
    Very old thread u may need to start a new thread to get your answer
    Plus this is an old school method not used for years by the more informative people, this was a copy and paste just to make a thread!
    Knock Em Down and Keep Em Down!

  8. #8
    Elite Maijah's Avatar
    Join Date
    Jul 2014
    Location
    The land of steady habits
    Posts
    914
    Thanks
    303
    Thanked 422 Times in 286 Posts
    Cool story bro

    "You wouldn't know Gains if it was giving you a rim job". -Pillar of balance

Similar Threads

  1. converting raws into caps/ liquid oral?
    By mabdelrasoul in forum Chemical Conversion and Homebrewing
    Replies: 11
    Last Post: 08-20-2016, 07:57 PM
  2. Liquid oral tips?
    By Bicepticon in forum Chemical Conversion and Homebrewing
    Replies: 14
    Last Post: 02-14-2013, 08:52 PM
  3. Liquid Oral Conversions
    By K1 in forum Chemical Conversion and Homebrewing
    Replies: 2
    Last Post: 08-28-2012, 03:56 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •