K1
Senior Member
- Joined
- Aug 26, 2012
- Messages
- 455
- Reaction score
- 24
- Points
- 0
By: Sallyanne
Several years ago, I learned how to convert pellets into injectible tren because my boyfriend (bless him) was useless with this kind of thing. I'd much rather he (and all of you) get the proper knowledge and a safe product than to buy from a UG that is probably converting in the bathroom sink. Once I found out how to get my hands on powders, I realized how easy and cost effective it is to convert them.
Chemicals you'll need for almost every conversion:
BB: Benzyl benzoate
BA: benzyl alcohol (make sure that you do not exceed 5% BA for any of the conversions)
For Liquid Orals:
PEG 300: Polyethylene Glycol
Oils:
Sesame oil is good, and so is grape see oil. Stay away from the thicker oils, and make sure you don't have an alergy to the oil you're using (walnut, for example).
Supplies:
Some companies sell sterile vials with the stopper and crimper already on them. This is good if you have only a small amount to make or only convert every once in a while. Remember to use a venting needle with these when adding your final conversion to them. (transfer air out while putting the product in.)
syringes 3cc & 5/10cc or bigger
18 or 20 gauge needles to vent and to transfer
Vials/beakers/glass measuring cups for mixing - heat proof
Sterile Vials or vials/stoppers/crimper for your product
sterile filters - whatman or equivelent
plastic or glass mixing spoons/swizzles. No metal
shallow pan to sterilize vials and to heat up mixtures
Good Luck!
Several years ago, I learned how to convert pellets into injectible tren because my boyfriend (bless him) was useless with this kind of thing. I'd much rather he (and all of you) get the proper knowledge and a safe product than to buy from a UG that is probably converting in the bathroom sink. Once I found out how to get my hands on powders, I realized how easy and cost effective it is to convert them.
Chemicals you'll need for almost every conversion:
BB: Benzyl benzoate
BA: benzyl alcohol (make sure that you do not exceed 5% BA for any of the conversions)
For Liquid Orals:
PEG 300: Polyethylene Glycol
Oils:
Sesame oil is good, and so is grape see oil. Stay away from the thicker oils, and make sure you don't have an alergy to the oil you're using (walnut, for example).
Supplies:
Some companies sell sterile vials with the stopper and crimper already on them. This is good if you have only a small amount to make or only convert every once in a while. Remember to use a venting needle with these when adding your final conversion to them. (transfer air out while putting the product in.)
syringes 3cc & 5/10cc or bigger
18 or 20 gauge needles to vent and to transfer
Vials/beakers/glass measuring cups for mixing - heat proof
Sterile Vials or vials/stoppers/crimper for your product
sterile filters - whatman or equivelent
plastic or glass mixing spoons/swizzles. No metal
shallow pan to sterilize vials and to heat up mixtures
Good Luck!