Page 1 of 2 12 LastLast
Results 1 to 20 of 23
  1. #1
    Member
    Join Date
    Oct 2012
    Location
    Toronto
    Posts
    17
    Thanks
    0
    Thanked 1 Time in 1 Post

    2 oils in 1 syringe (could use some tips on this)

    I am about to start my fourth cycle today and its my 1st time that i need to inject 2 different oils.

    Usually I draw from vial with a 20 guage and inject with a 25 guage.


    Will I need 2 different needles for the 2 oils?


    please give me some tips.

  2. #2
    Senior Member
    Join Date
    Apr 2012
    Posts
    462
    Thanks
    54
    Thanked 25 Times in 20 Posts

    Re: 2 oils in 1 syringe (could use some tips on this)

    I use the same needle to draw from multiple vials and I pin with a new one.

  3. #3
    Elite j2048b's Avatar
    Join Date
    Jul 2012
    Location
    somewhere?....anywhere, everywhere!
    Posts
    3,854
    Thanks
    5,120
    Thanked 939 Times in 699 Posts

    Re: 2 oils in 1 syringe (could use some tips on this)

    I use to use 1 neeedle per vial, and the second needle used for the second vile, pin w it! No worries, no sense in waisting 3 needles, or even draw both as described and back fill a ton of syringes and ur set for a few injections
    "I think I'm gonna try to do a barrel role, and if that goes good, I'm just gonna nose down and call it a night"

    "Nahh....I'm a white Guy"

    Muther Fawken RICH -RIP BIG BALLS

  4. #4
    Senior Member
    Join Date
    Jul 2012
    Posts
    149
    Thanks
    18
    Thanked 4 Times in 3 Posts

    Re: 2 oils in 1 syringe (could use some tips on this)

    I use the same needle to draw all my gear then I use a different just to inject.

  5. #5
    Senior Member
    Join Date
    Sep 2012
    Posts
    1,021
    Thanks
    0
    Thanked 3 Times in 3 Posts

    Re: 2 oils in 1 syringe (could use some tips on this)

    Originally Posted by chicken wing View Post
    I use the same needle to draw from multiple vials and I pin with a new one.
    this way is best...

  6. #6
    Elite cotton2012's Avatar
    Join Date
    May 2013
    Posts
    471
    Thanks
    183
    Thanked 101 Times in 73 Posts

    Re: 2 oils in 1 syringe (could use some tips on this)

    You can use two oils in same syringe. Draw first oil like you normally would, then draw enough air into the syringe between the 1st oil and needle to take the place in the second vial for the second oil. After you jab it in keep the air above the 1st oil and push air into the second vial, I usually allow a little air bubble to be left in the syringe as not to get any of the 1st oil into the vial of the second oil. At that point draw in the second oil to the point you want, (I go a little past here) and then push out excess air. Keep a steady hand to not mix the oils causing you to get any of the first oil into the second vial as you push the excess back into the second vial. It easy once you get the hang of it. I wouldn't go more than 2ML in any large muscle group (glutes, quads) and stick to around 1ML in the smaller ones.


    Cheers Cotton,

  7. #7
    Elite grizzldsealpoacher's Avatar
    Join Date
    Apr 2012
    Posts
    2,096
    Thanks
    385
    Thanked 595 Times in 395 Posts

    Re: 2 oils in 1 syringe (could use some tips on this)

    Originally Posted by chicken wing View Post
    I use the same needle to draw from multiple vials and I pin with a new one.
    ^^^this^^^
    Enjoy Your Ride!

  8. #8
    Elite bubbagump's Avatar
    Join Date
    Oct 2012
    Location
    Midwest
    Posts
    1,319
    Thanks
    290
    Thanked 221 Times in 164 Posts

    Re: 2 oils in 1 syringe (could use some tips on this)

    I use the same needle to draw and pin. I change it once a week or so.


    Just kidding. Don't do that....

  9. #9
    Senior Member Times Roman's Avatar
    Join Date
    Oct 2012
    Location
    Northern Cali
    Posts
    1,024
    Thanks
    0
    Thanked 10 Times in 9 Posts

    Re: 2 oils in 1 syringe (could use some tips on this)

    Originally Posted by chicken wing View Post
    I use the same needle to draw from multiple vials and I pin with a new one.
    ^this

    I'll mix anything oil based, or anything water based, (but not oil and water at the same time) all in the same syringe.

    No need in using a bunch of tips.

    one tip for drawing (if oil), and one tip for injecting.

    Pretty simple really

  10. #10
    Senior Member JM750's Avatar
    Join Date
    Feb 2013
    Location
    Lost in Assachusetts
    Posts
    218
    Thanks
    0
    Thanked 4 Times in 3 Posts

    Re: 2 oils in 1 syringe (could use some tips on this)

    Originally Posted by dboldouggie View Post
    I use the same needle to draw all my gear then I use a different just to inject.
    This right here. There is no science to it.

  11. #11
    Member
    Join Date
    Oct 2012
    Location
    Toronto
    Posts
    17
    Thanks
    0
    Thanked 1 Time in 1 Post

    Re: 2 oils in 1 syringe (could use some tips on this)

    thanks guys. pinned a couple of hours ago, and it went pretty good.

  12. #12
    Senior Member
    Join Date
    Jun 2012
    Posts
    923
    Thanks
    19
    Thanked 33 Times in 22 Posts

    Re: 2 oils in 1 syringe (could use some tips on this)

    Originally Posted by j2048b View Post
    I use to use 1 neeedle per vial, and the second needle used for the second vile, pin w it! No worries, no sense in waisting 3 needles, or even draw both as described and back fill a ton of syringes and ur set for a few injections
    Do NOT prefil syringes with anything that is made with eo or g.

    I'm telling you this from experience wasting hundreds of dollars in gear.

  13. #13
    Elite j2048b's Avatar
    Join Date
    Jul 2012
    Location
    somewhere?....anywhere, everywhere!
    Posts
    3,854
    Thanks
    5,120
    Thanked 939 Times in 699 Posts

    Re: 2 oils in 1 syringe (could use some tips on this)

    Originally Posted by 69nites View Post
    Do NOT prefil syringes with anything that is made with eo or g.

    I'm telling you this from experience wasting hundreds of dollars in gear.
    Noted 69 and thanks!
    "I think I'm gonna try to do a barrel role, and if that goes good, I'm just gonna nose down and call it a night"

    "Nahh....I'm a white Guy"

    Muther Fawken RICH -RIP BIG BALLS

  14. #14
    Elite FreeBirdSam's Avatar
    Join Date
    Nov 2012
    Location
    Sooner State
    Posts
    785
    Thanks
    454
    Thanked 203 Times in 108 Posts

    Re: 2 oils in 1 syringe (could use some tips on this)

    Originally Posted by 69nites View Post
    Do NOT prefil syringes with anything that is made with eo or g.

    I'm telling you this from experience wasting hundreds of dollars in gear.

    Good info here, I'll add that the reason for not doing this is because it degrades the rubber on the syringe's plunger, (imagine black swirls of melted rubber in your gear).. it will also leak most of it out.

  15. #15
    Senior Member Four1Thr33's Avatar
    Join Date
    May 2012
    Location
    Unknown
    Posts
    2,122
    Thanks
    53
    Thanked 53 Times in 38 Posts

    Re: 2 oils in 1 syringe (could use some tips on this)

    I also do the same ... But 3 oils and change the pin before injection
    Wolves don't loose sleepover opinions of sheep

  16. #16
    Senior Member powermaster's Avatar
    Join Date
    Aug 2012
    Location
    oklahoma
    Posts
    390
    Thanks
    10
    Thanked 19 Times in 16 Posts

    Re: 2 oils in 1 syringe (could use some tips on this)

    Originally Posted by dboldouggie View Post
    I use the same needle to draw all my gear then I use a different just to inject.
    Same here. Never has any issues yet

  17. #17
    Member
    Join Date
    Aug 2013
    Location
    EVERYWHERE
    Posts
    21
    Thanks
    0
    Thanked 0 Times in 0 Posts

    Re: 2 oils in 1 syringe (could use some tips on this)

    I never put two in the same before. never even crossed my mind.
    i try not to do more then 4 pins a weeks

  18. #18
    Elite ken Sass's Avatar
    Join Date
    Jul 2012
    Posts
    2,057
    Thanks
    1,182
    Thanked 565 Times in 334 Posts

    Re: 2 oils in 1 syringe (could use some tips on this)

    Originally Posted by chicken wing View Post
    I use the same needle to draw from multiple vials and I pin with a new one.
    i agree with winf. can't be to careful

  19. #19
    Senior Moderator NbleSavage's Avatar
    Join Date
    Apr 2012
    Posts
    11,058
    Thanks
    19,499
    Thanked 9,972 Times in 4,964 Posts

    Re: 2 oils in 1 syringe (could use some tips on this)

    Pull from 2 or 3 depending, and pin with the same. Never had any issues. Always hit each vial with your alcohol pad before pulling from it and obviously alcohol pad on your injection site before pinning.

    Be safe.

    - Savage

  20. #20
    Elite transcend2007's Avatar
    Join Date
    Aug 2012
    Location
    Arizona
    Posts
    2,789
    Thanks
    733
    Thanked 1,868 Times in 951 Posts

    Re: 2 oils in 1 syringe (could use some tips on this)

    I draw from 3 vials with one pin, change to injection needle good to go.

    I do use 2 different alcohol swabs. One for 3 vials of gear and a different one on the injection site.
    HRT for life!

Page 1 of 2 12 LastLast

Similar Threads

  1. Replies: 39
    Last Post: 07-05-2016, 11:13 AM
  2. Could A Girlfriend Convince You Not To Use Steroids?
    By Ace Corona in forum Anabolic Steroid Cycle Discussion
    Replies: 218
    Last Post: 08-02-2015, 10:04 PM
  3. Carrier oils
    By Canadian muscle in forum Chemical Conversion and Homebrewing
    Replies: 7
    Last Post: 05-29-2014, 12:00 AM
  4. TNE mix with other oils??
    By Yaya in forum Anabolic Steroids
    Replies: 7
    Last Post: 01-15-2013, 02:39 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •